Bulk Fiber Optic Cable: Buying on Reels Without Surprise Costs

Bulk Fiber Optic Cable: Buying on Reels Without Surprise Costs

How to order bulk fiber optic cable on reels: standard drum lengths, cut-length fees, packing weights and the shipping questions to settle before the deposit.

Buying bulk fiber optic cable is a logistics decision as much as a technical one. The glass on a G.652D outdoor cable from two factories may test the same, but the reel it ships on decides whether your crew can pay out the run cleanly or fights a kinked, over-packed drum at the pole. This guide covers the reel-side questions buyers should settle before the deposit: drum lengths, cut lengths, packing weight and freight.

Standard reels vs project cut lengths

Order formBest forTrade-off
Standard factory reels (commonly 2–4 km per drum for outdoor cables)Distributors, stock programs, long routesBest unit price; some offcut waste per route
Project cut lengths (e.g. 12 Γ— 500 m)Campus and FTTH builds with known spansLess waste on site; per-length handling fee and longer lead time
Custom counts on the same constructionMixed buildings sharing one cable typeOne SKU to stock; higher fiber count than any single route needs

Drum sizes and standard lengths differ per cable construction β€” confirm the exact figures on the datasheet and quotation for your SKU.

Reel-side details that affect the site

  • Drum material and flange. Wooden drums protect outdoor cables in stacked sea freight; check the flange diameter against your reel stand.
  • Payout direction. State top-payout or side-payout when the crew's reel stand requires it; reversing a reel on site wastes setup time on every drum.
  • End sealing. Every cable end must be capped against water ingress β€” confirm factory caps on both ends of each drum.
  • Sequential meter marks. Print the meter marks so a crew can measure remaining cable on a part-used reel.

Key specifications at a glance

ParameterTypical value
Fiber typeG.652D single-mode; G.657A2 for tight routes
Attenuation @ 1310 / 1550 nm≀0.4 / ≀0.3 dB/km (typical; refer to datasheet)
Standard reel lengthsCommonly 2–4 km per drum for outdoor constructions
Operation temperatureβˆ’40 Β°C to +70 Β°C (typical)
PackingWooden drum, end-capped, sea-worthy wrapping
Lead time7–15 working days after deposit (standard reels)
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Buyer FAQ

Can we order one cable type in several fiber counts on one order?

Yes β€” fiber count is a build option on each construction. Send the per-building counts and we quote each SKU separately within one order.

How is bulk cable freight calculated?

Cable reels ship by gross weight and volume. Drum count, drum dimensions and destination port decide the freight figure β€” request the packing list with the quotation so the landed cost is known before the deposit.

Is there a minimum order for bulk cable?

The minimum order is quoted per cable type and order volume. Send the route lengths and fiber counts with your inquiry and the quotation states the exact MOQ for each SKU.

Decision tool

How will the cable ship?

Choose your order form β€” the answer restates the reel rules on this page.

Request a solution quotation

Describe your deployment scenario, required connector types, fiber counts and target quantities. The more specific your inputs, the faster our engineers can confirm the matching products and lead time.

Product Inquiry
β—†
Product Inquiry
Bulk Fiber Optic Cable: Buying on Reels Without Surprise Costs (bulk-fiber-cable-reel-guide)