
SC Duplex Connector Cords: Clip-In Pairs Done Right
An SC duplex cord joins two SC connectors in one clip-in body. Polarity, clip direction and panel cutouts are the three details that decide whether the pair lands cleanly.
An SC duplex connector cord bonds two simplex SC connectors into one zipcord with a shared clip-in shroud, so a two-fiber link plugs in as a single unit. The SC duplex connector concept is simple; the field failures are not about the connector at all — they are polarity, clip orientation and cutout mismatch.
The three details that matter
| Detail | What good looks like | Failure if ignored |
|---|---|---|
| Polarity (A/B) | Tx at one end meets Rx at the other — one crossover per link, stated per SKU | Both ends straight: the link never comes up; both crossed: double crossover breaks it again |
| Clip direction | Clip side matches the panel's adapter orientation (latch up/down per rack standard) | Cords hang inverted, strain the latch, and resist future re-patching |
| Cutout fit | Duplex clip matches the panel's duplex adapter footprint | Single adapters behind a duplex clip: the pair will not seat |
Ordering discipline
- State the polarity convention. TIA straight (A-to-B) or your house standard — the factory builds to it and labels it.
- Multimode or single mode explicitly. The SC-SC OM3 duplex cord serves 10G LANs; single-mode duplex SC serves ODF backbones.
- Match the adapters behind. Duplex cords land on duplex adapters or two simplex adapters ganged in one flange — confirm before volume orders with our SC/UPC adapters.
- Length to the rack. Duplex zipcords coil worse than simplex; route-measure dense bays before standardizing one length.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Construction | 2 fibers, duplex zipcord with shared clip-in shroud |
| Connectors | SC/UPC or SC/APC, duplex clip |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical, single mode) |
| Lengths | 1–20 m standard; custom on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Values marked typical are industry reference figures; the shipped datasheet for each SKU governs.
Buyer FAQ
Why did our duplex SC pair not light up?
Almost always polarity: a straight-through pair on a transceiver port keeps tx meeting tx. State A/B polarity per SKU so factory labels settle it before the rack.
Can duplex SC cords mix with duplex LC in one rack?
Yes — different connector families with separate cutouts. Where an SC panel meets LC equipment, a hybrid cord beats an adapter chain.
Is APC available on duplex SC cords?
Yes, in both simplex and duplex builds. Green hardware end-to-end and an APC-referenced test set are the acceptance conditions.
Karar aracı
Dupleks çiftinizin yerleşmesini ne sağlar?
Çift kararını seçin — yanıt, bu sayfadaki klipsli yerleştirme kurallarını yeniden ifade eder.
Çözüm fiyat teklifi isteyin
Kurulum senaryonuzu, gerekli konnektör tiplerini, fiber sayılarını ve hedef miktarları tanımlayın. Girdileriniz ne kadar spesifik olursa mühendislerimiz uygun ürünleri ve üretim/teslim süresini o kadar hızlı teyit edebilir.
