
SC Duplex Connector Cords: Clip-In Pairs Done Right
An SC duplex cord joins two SC connectors in one clip-in body. Polarity, clip direction and panel cutouts are the three details that decide whether the pair lands cleanly.
An SC duplex connector cord bonds two simplex SC connectors into one zipcord with a shared clip-in shroud, so a two-fiber link plugs in as a single unit. The SC duplex connector concept is simple; the field failures are not about the connector at all — they are polarity, clip orientation and cutout mismatch.
The three details that matter
| Detail | What good looks like | Failure if ignored |
|---|---|---|
| Polarity (A/B) | Tx at one end meets Rx at the other — one crossover per link, stated per SKU | Both ends straight: the link never comes up; both crossed: double crossover breaks it again |
| Clip direction | Clip side matches the panel's adapter orientation (latch up/down per rack standard) | Cords hang inverted, strain the latch, and resist future re-patching |
| Cutout fit | Duplex clip matches the panel's duplex adapter footprint | Single adapters behind a duplex clip: the pair will not seat |
Ordering discipline
- State the polarity convention. TIA straight (A-to-B) or your house standard — the factory builds to it and labels it.
- Multimode or single mode explicitly. The SC-SC OM3 duplex cord serves 10G LANs; single-mode duplex SC serves ODF backbones.
- Match the adapters behind. Duplex cords land on duplex adapters or two simplex adapters ganged in one flange — confirm before volume orders with our SC/UPC adapters.
- Length to the rack. Duplex zipcords coil worse than simplex; route-measure dense bays before standardizing one length.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Construction | 2 fibers, duplex zipcord with shared clip-in shroud |
| Connectors | SC/UPC or SC/APC, duplex clip |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical, single mode) |
| Lengths | 1–20 m standard; custom on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Values marked typical are industry reference figures; the shipped datasheet for each SKU governs.
Buyer FAQ
Why did our duplex SC pair not light up?
Almost always polarity: a straight-through pair on a transceiver port keeps tx meeting tx. State A/B polarity per SKU so factory labels settle it before the rack.
Can duplex SC cords mix with duplex LC in one rack?
Yes — different connector families with separate cutouts. Where an SC panel meets LC equipment, a hybrid cord beats an adapter chain.
Is APC available on duplex SC cords?
Yes, in both simplex and duplex builds. Green hardware end-to-end and an APC-referenced test set are the acceptance conditions.
Инструмент выбора
Что обеспечивает надёжную установку дуплексной пары?
Выберите решение по паре — ответ повторяет правила клипсового монтажа на этой странице.
Запросить коммерческое предложение на решение
Опишите ваш сценарий развёртывания, требуемые типы коннекторов, количество волокон и целевые объёмы. Чем конкретнее ваши данные, тем быстрее наши инженеры подтвердят подходящие продукты и срок производства.
