
LC to LC Single Mode Patch Cable: Specs That Decide the Link
What actually separates one LC-LC single-mode duplex cord from another: OS2 fiber grade, UPC vs APC ends, duplex polarity and jacket rating.
Two LC to LC single mode fiber patch cables can look identical and behave differently on the test set. The differences that matter for an OS2 link are the fiber grade behind the blue jacket, the endface polish, the duplex polarity and the jacket rating. This page walks the checklist we use when a buyer asks us to quote a duplex LC-LC cord for a specific link.
The OS2 cord checklist
| Check | What to confirm | Why it matters |
|---|---|---|
| Fiber grade | OS2 / G.652D or G.657A2 bend-insensitive | G.657A2 tolerates tight panel routing without loss spikes; G.652D suits straight runs |
| Polish | UPC (blue) or APC (green) on both ends | UPC ≥50 dB and APC ≥60 dB typical return loss; mixed polish on one cord is not offered for good reason |
| Duplex polarity | A-position tx/rx crossover or straight | A crossed duplex cord replaces what two straight cords plus a crossover adapter used to do |
| Jacket rating | LSZH 2.0 mm for data halls; OFNR for risers | Matches the building code where the cord is installed |
Loss budget in practice
A duplex LC-LC cord contributes two mated pairs (one per fiber). With our standard ≤0.3 dB typical / ≤0.5 dB max per pair at 1310/1550 nm, a single cord stays within a 1.0 dB worst-case envelope — figures marked typical must be confirmed on the shipped datasheet. Links that chain several cords and panels should be summed per pair, not per cord.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Fiber | OS2 single-mode, G.652D / G.657A2 options |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per mated pair |
| Return loss | UPC ≥50 dB / APC ≥60 dB |
| Duplex options | Zipcord duplex, polarity A or straight |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
See the product page for the LC-LC duplex single-mode patch cord; FC-ended builds are covered by the FC-FC single-mode patch cord.
Buyer FAQ
Is an APC duplex LC cord available?
Yes — LC/APC duplex cords are part of the OEM/ODM range. APC is standard where the link serves PON or RF overlay and needs the higher return loss.
Which polarity should we order?
Follow the panel architecture: crossed (A-position) duplex cords for panel-to-equipment links where the crossover happens in the cord, straight cords where cassettes already handle the crossover. Mixing conventions in one rack is the usual cause of a link that will not come up.
Can cords be supplied to custom lengths?
Yes — custom lengths are standard OEM/ODM work. Provide the routed lengths per position so the quote and the factory test report match the installed cord.
Инструмент выбора
Какая деталь корда OS2 определяет ваш заказ?
Выберите свойство, которое нужно зафиксировать первым, — в ответе повторяется контрольный список с этой страницы.
Запросить коммерческое предложение на решение
Опишите ваш сценарий развёртывания, требуемые типы коннекторов, количество волокон и целевые объёмы. Чем конкретнее ваши данные, тем быстрее наши инженеры подтвердят подходящие продукты и срок производства.
