
Single Mode Fiber Jumpers: Picking the Right Family
Single-mode jumpers come in LC, SC and FC families with UPC or APC polish. Match the glass, the polish and the connector family to the link — in that order.
Single mode fiber jumpers are the cords that carry the actual traffic: OS2 glass at 9/125 µm, terminated in LC, SC or FC connectors, simplex or duplex. Ordering the wrong family costs more than money — an APC cord on a UPC panel fails the link quietly. This page maps the three families and the two polish options so an order lands right the first time.
The three connector families
| Family | Locking | Typical home | Nexora cord |
|---|---|---|---|
| LC | Latch, 1.25 mm ferrule | Data centers, high-density panels, SFP ports | LC-LC duplex single mode |
| SC | Push-pull, 2.5 mm ferrule | Backbone ODFs, FTTH, access networks | SC-SC G.652D |
| FC | Screw-on threaded, 2.5 mm ferrule | Test equipment, CATV headends, vibration-prone racks | FC-FC single mode |
Polish: UPC or APC
- UPC (blue hardware). Flat end face, return loss ≥50 dB typical — the default for enterprise LAN and data-center links.
- APC (green hardware). 8° angled face, return loss ≥60 dB typical — required for FTTH, PON and RF overlay where reflected light matters.
- Never mix. An APC plug must always meet an APC port or APC adapter; the two geometries are not interchangeable on one mated pair.
Simplex or duplex
Two-fiber transceivers need duplex cords — two single-mode fibers joined in one zipcord with the tx/rx crossover built in. Single-fiber links, splitters and most FTTH drops use simplex. Count the fibers per link before counting the cords.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Fiber | OS2 G.652D single mode, 9/125 µm |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical) |
| Jacket | 2.0/3.0 mm LSZH or PVC; duplex zipcord |
| Lengths | Standard 1–20 m; custom lengths on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Values marked typical are industry reference figures; the shipped datasheet for each SKU governs.
Buyer FAQ
Which family should a mixed rack standardize on?
LC for equipment side density, SC where the panel is already SC — and hybrid cords where the two meet, rather than adapters between cords. The family follows the ports, not preference.
Do single-mode jumpers work on multimode ports?
The connector may click in, but the 9 µm core over-fills or under-fills the multimode geometry and the link budget breaks. Match the cord to the installed glass class.
Can we mix UPC and APC cords in one order?
Yes — both are built to order. State the polish per SKU on the inquiry so packing and labels match the panels they serve.
Ferramenta de decisão
O que fixa a sua encomenda de jumper monomodo?
Escolha a decisão a fixar — a resposta reitera as regras da família nesta página.
Solicitar uma cotação de solução
Descreva o seu cenário de implementação, os tipos de conector necessários, as contagens de fibra e as quantidades pretendidas. Quanto mais específicos forem os seus dados, mais rapidamente os nossos engenheiros poderão confirmar os produtos correspondentes e o prazo de entrega.
