Single Mode Fiber Jumpers: Picking the Right Family

Single Mode Fiber Jumpers: Picking the Right Family

Single-mode jumpers come in LC, SC and FC families with UPC or APC polish. Match the glass, the polish and the connector family to the link — in that order.

Single mode fiber jumpers are the cords that carry the actual traffic: OS2 glass at 9/125 µm, terminated in LC, SC or FC connectors, simplex or duplex. Ordering the wrong family costs more than money — an APC cord on a UPC panel fails the link quietly. This page maps the three families and the two polish options so an order lands right the first time.

The three connector families

FamilyLockingTypical homeNexora cord
LCLatch, 1.25 mm ferruleData centers, high-density panels, SFP portsLC-LC duplex single mode
SCPush-pull, 2.5 mm ferruleBackbone ODFs, FTTH, access networksSC-SC G.652D
FCScrew-on threaded, 2.5 mm ferruleTest equipment, CATV headends, vibration-prone racksFC-FC single mode

Polish: UPC or APC

  • UPC (blue hardware). Flat end face, return loss ≥50 dB typical — the default for enterprise LAN and data-center links.
  • APC (green hardware). 8° angled face, return loss ≥60 dB typical — required for FTTH, PON and RF overlay where reflected light matters.
  • Never mix. An APC plug must always meet an APC port or APC adapter; the two geometries are not interchangeable on one mated pair.

Simplex or duplex

Two-fiber transceivers need duplex cords — two single-mode fibers joined in one zipcord with the tx/rx crossover built in. Single-fiber links, splitters and most FTTH drops use simplex. Count the fibers per link before counting the cords.

Key specifications at a glance

ParameterTypical value
FiberOS2 G.652D single mode, 9/125 µm
Insertion loss≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm)
Return lossUPC ≥50 dB / APC ≥60 dB (typical)
Jacket2.0/3.0 mm LSZH or PVC; duplex zipcord
LengthsStandard 1–20 m; custom lengths on request
MOQ100 pcs per SKU
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Values marked typical are industry reference figures; the shipped datasheet for each SKU governs.

Buyer FAQ

Which family should a mixed rack standardize on?

LC for equipment side density, SC where the panel is already SC — and hybrid cords where the two meet, rather than adapters between cords. The family follows the ports, not preference.

Do single-mode jumpers work on multimode ports?

The connector may click in, but the 9 µm core over-fills or under-fills the multimode geometry and the link budget breaks. Match the cord to the installed glass class.

Can we mix UPC and APC cords in one order?

Yes — both are built to order. State the polish per SKU on the inquiry so packing and labels match the panels they serve.

Narzędzie decyzyjne

Co decyduje o zamówieniu złącza jednomodowego?

Należy wybrać decyzję do ustalenia — odpowiedź powtarza zasady dotyczące rodziny z tej strony.

Poproś o wycenę rozwiązania

Opisz scenariusz wdrożenia, wymagane typy złączy, liczby włókien i docelowe ilości. Im bardziej szczegółowe dane, tym szybciej nasi inżynierowie potwierdzą pasujące produkty i czas realizacji.

Zapytanie o produkt
◆
Zapytanie o produkt
Single Mode Fiber Jumpers: Picking the Right Family (single-mode-jumper-families)