
Premade Fiber Optic Cable: Factory Terminated vs Field Work
A premade fiber optic cable arrives connectorized and tested at the factory. What that buys on schedule and loss — and the two places field splicing still wins.
A premade fiber optic cable is a cable plant section that leaves the factory with connectors installed and IL/RL tested per fiber. Against field termination it trades one thing for another: you pay for factory precision and shipping care, and you save crew hours, consumables and the variance of on-site polish quality. The decision is per route, not per project.
Where factory-terminated wins, where field wins
| Factor | Premade (factory) | Field termination |
|---|---|---|
| Schedule | Pull, clean, plug — hours per run | Splice/polish per fiber, days per room |
| Loss consistency | ≤0.3 dB typical / ≤0.5 dB max per end, tested | Crew-dependent; verify every fiber |
| Route accuracy | Needs final measurements first | Tolerates survey error |
| Long hauls, many splices | Shipping a 3 km terminated reel is impractical | Pigtail + fusion splice per closure |
| Repairs | Swap the assembly | Re-terminate in place |
Ordering checklist for premade runs
- Freeze the route first. Factory lengths are exact; measure the installed pathway, add slack at both ends, then order.
- Specify per end. Connector, polish and — for duplex — A/B polarity at each end, as with any single mode cord order.
- Plan the pull. Terminated ends cannot pass small ducts; agree pulling eyes, drum handling and end protection before dispatch.
- Accept on data. The factory test sheet travels with the reel; spot-check a sample on arrival and log the rest.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Cable types | Tight-buffered indoor, distribution, or outdoor loose tube |
| Fiber counts | 2–144 cores typical, factory-terminated |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per mated end (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical, single mode) |
| Test record | Per-fiber IL/RL sheet shipped with each assembly |
| MOQ | Per assembly, factory-cut lengths |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Loss values are typical acceptance references; each assembly ships with its own tested record.
Buyer FAQ
Is premade always more expensive?
Per meter yes; per link often no. Crew hours, polishing consumables and rework usually close the gap on multi-fiber indoor routes.
Can outdoor cable arrive factory-terminated?
Yes for access-scale runs — outdoor-rated assemblies with pulling eyes and sealed ends are common; long-haul routes stay spliced.
What happens if the route changes after ordering?
Cut ends and splice on pigtails, or order a corrected length. That is why the route measurement freeze comes first.
Narzędzie decyzyjne
Prefabrykowane czy na miejscu dla tej trasy?
Proszę wybrać decyzję dotyczącą zakończeń — odpowiedź powtarza zasady fabryczne kontra na miejscu opisane na tej stronie.
Poproś o wycenę rozwiązania
Opisz scenariusz wdrożenia, wymagane typy złączy, liczby włókien i docelowe ilości. Im bardziej szczegółowe dane, tym szybciej nasi inżynierowie potwierdzą pasujące produkty i czas realizacji.
