LC to LC Single Mode Patch Cable: Specs That Decide the Link

LC to LC Single Mode Patch Cable: Specs That Decide the Link

What actually separates one LC-LC single-mode duplex cord from another: OS2 fiber grade, UPC vs APC ends, duplex polarity and jacket rating.

Two LC to LC single mode fiber patch cables can look identical and behave differently on the test set. The differences that matter for an OS2 link are the fiber grade behind the blue jacket, the endface polish, the duplex polarity and the jacket rating. This page walks the checklist we use when a buyer asks us to quote a duplex LC-LC cord for a specific link.

The OS2 cord checklist

CheckWhat to confirmWhy it matters
Fiber gradeOS2 / G.652D or G.657A2 bend-insensitiveG.657A2 tolerates tight panel routing without loss spikes; G.652D suits straight runs
PolishUPC (blue) or APC (green) on both endsUPC ≥50 dB and APC ≥60 dB typical return loss; mixed polish on one cord is not offered for good reason
Duplex polarityA-position tx/rx crossover or straightA crossed duplex cord replaces what two straight cords plus a crossover adapter used to do
Jacket ratingLSZH 2.0 mm for data halls; OFNR for risersMatches the building code where the cord is installed

Loss budget in practice

A duplex LC-LC cord contributes two mated pairs (one per fiber). With our standard ≤0.3 dB typical / ≤0.5 dB max per pair at 1310/1550 nm, a single cord stays within a 1.0 dB worst-case envelope — figures marked typical must be confirmed on the shipped datasheet. Links that chain several cords and panels should be summed per pair, not per cord.

Key specifications at a glance

ParameterTypical value
FiberOS2 single-mode, G.652D / G.657A2 options
Insertion loss≤0.3 dB typical / ≤0.5 dB max per mated pair
Return lossUPC ≥50 dB / APC ≥60 dB
Duplex optionsZipcord duplex, polarity A or straight
MOQ100 pcs per SKU
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

See the product page for the LC-LC duplex single-mode patch cord; FC-ended builds are covered by the FC-FC single-mode patch cord.

Buyer FAQ

Is an APC duplex LC cord available?

Yes — LC/APC duplex cords are part of the OEM/ODM range. APC is standard where the link serves PON or RF overlay and needs the higher return loss.

Which polarity should we order?

Follow the panel architecture: crossed (A-position) duplex cords for panel-to-equipment links where the crossover happens in the cord, straight cords where cassettes already handle the crossover. Mixing conventions in one rack is the usual cause of a link that will not come up.

Can cords be supplied to custom lengths?

Yes — custom lengths are standard OEM/ODM work. Provide the routed lengths per position so the quote and the factory test report match the installed cord.

Strumento decisionale

Quale dettaglio del cordone OS2 determina l'ordine?

Scegliere la proprietà da definire per prima — la risposta ribadisce la lista di controllo riportata in questa pagina.

Richiedi un preventivo per una soluzione

Descrivi il tuo scenario di deployment, i tipi di connettore richiesti, il numero di fibre e le quantità target. Più i tuoi input sono specifici, più rapidamente i nostri ingegneri potranno confermare i prodotti corrispondenti e il lead time.

Richiesta prodotto
◆
Richiesta prodotto
LC to LC Single Mode Patch Cable: Specs That Decide the Link (lc-lc-single-mode-guide)