Premade Fiber Optic Cable: Factory Terminated vs Field Work

Premade Fiber Optic Cable: Factory Terminated vs Field Work

A premade fiber optic cable arrives connectorized and tested at the factory. What that buys on schedule and loss — and the two places field splicing still wins.

A premade fiber optic cable is a cable plant section that leaves the factory with connectors installed and IL/RL tested per fiber. Against field termination it trades one thing for another: you pay for factory precision and shipping care, and you save crew hours, consumables and the variance of on-site polish quality. The decision is per route, not per project.

Where factory-terminated wins, where field wins

FactorPremade (factory)Field termination
SchedulePull, clean, plug — hours per runSplice/polish per fiber, days per room
Loss consistency≤0.3 dB typical / ≤0.5 dB max per end, testedCrew-dependent; verify every fiber
Route accuracyNeeds final measurements firstTolerates survey error
Long hauls, many splicesShipping a 3 km terminated reel is impracticalPigtail + fusion splice per closure
RepairsSwap the assemblyRe-terminate in place

Ordering checklist for premade runs

  • Freeze the route first. Factory lengths are exact; measure the installed pathway, add slack at both ends, then order.
  • Specify per end. Connector, polish and — for duplex — A/B polarity at each end, as with any single mode cord order.
  • Plan the pull. Terminated ends cannot pass small ducts; agree pulling eyes, drum handling and end protection before dispatch.
  • Accept on data. The factory test sheet travels with the reel; spot-check a sample on arrival and log the rest.

Key specifications at a glance

ParameterTypical value
Cable typesTight-buffered indoor, distribution, or outdoor loose tube
Fiber counts2–144 cores typical, factory-terminated
Insertion loss≤0.3 dB typical / ≤0.5 dB max per mated end (1310/1550 nm)
Return lossUPC ≥50 dB / APC ≥60 dB (typical, single mode)
Test recordPer-fiber IL/RL sheet shipped with each assembly
MOQPer assembly, factory-cut lengths
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Loss values are typical acceptance references; each assembly ships with its own tested record.

Buyer FAQ

Is premade always more expensive?

Per meter yes; per link often no. Crew hours, polishing consumables and rework usually close the gap on multi-fiber indoor routes.

Can outdoor cable arrive factory-terminated?

Yes for access-scale runs — outdoor-rated assemblies with pulling eyes and sealed ends are common; long-haul routes stay spliced.

What happens if the route changes after ordering?

Cut ends and splice on pigtails, or order a corrected length. That is why the route measurement freeze comes first.

Entscheidungshilfe

Vorkonfektioniert oder vor Ort für diese Strecke?

Treffen Sie die Konfektionierungsentscheidung — die Antwort gibt die Regeln Werks- vs. Feldkonfektionierung auf dieser Seite wieder.

Lösungsangebot anfordern

Beschreiben Sie Ihr Einsatzszenario, die benötigten Steckertypen, Faserzahlen und Zielmengen. Je spezifischer Ihre Angaben, desto schneller können unsere Ingenieure die passenden Produkte und die Lieferzeit bestätigen.

Produktanfrage
◆
Produktanfrage
Premade Fiber Optic Cable: Factory Terminated vs Field Work (premade-fiber-optic-cable)