
Premade Fiber Optic Cable: Factory Terminated vs Field Work
A premade fiber optic cable arrives connectorized and tested at the factory. What that buys on schedule and loss — and the two places field splicing still wins.
A premade fiber optic cable is a cable plant section that leaves the factory with connectors installed and IL/RL tested per fiber. Against field termination it trades one thing for another: you pay for factory precision and shipping care, and you save crew hours, consumables and the variance of on-site polish quality. The decision is per route, not per project.
Where factory-terminated wins, where field wins
| Factor | Premade (factory) | Field termination |
|---|---|---|
| Schedule | Pull, clean, plug — hours per run | Splice/polish per fiber, days per room |
| Loss consistency | ≤0.3 dB typical / ≤0.5 dB max per end, tested | Crew-dependent; verify every fiber |
| Route accuracy | Needs final measurements first | Tolerates survey error |
| Long hauls, many splices | Shipping a 3 km terminated reel is impractical | Pigtail + fusion splice per closure |
| Repairs | Swap the assembly | Re-terminate in place |
Ordering checklist for premade runs
- Freeze the route first. Factory lengths are exact; measure the installed pathway, add slack at both ends, then order.
- Specify per end. Connector, polish and — for duplex — A/B polarity at each end, as with any single mode cord order.
- Plan the pull. Terminated ends cannot pass small ducts; agree pulling eyes, drum handling and end protection before dispatch.
- Accept on data. The factory test sheet travels with the reel; spot-check a sample on arrival and log the rest.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Cable types | Tight-buffered indoor, distribution, or outdoor loose tube |
| Fiber counts | 2–144 cores typical, factory-terminated |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per mated end (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical, single mode) |
| Test record | Per-fiber IL/RL sheet shipped with each assembly |
| MOQ | Per assembly, factory-cut lengths |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Loss values are typical acceptance references; each assembly ships with its own tested record.
Buyer FAQ
Is premade always more expensive?
Per meter yes; per link often no. Crew hours, polishing consumables and rework usually close the gap on multi-fiber indoor routes.
Can outdoor cable arrive factory-terminated?
Yes for access-scale runs — outdoor-rated assemblies with pulling eyes and sealed ends are common; long-haul routes stay spliced.
What happens if the route changes after ordering?
Cut ends and splice on pigtails, or order a corrected length. That is why the route measurement freeze comes first.
أداة القرار
مسبق أم ميداني لهذا المسار؟
اختر قرار الإنهاء — تعيد الإجابة ذكر قواعد المصنع مقابل الميدان الواردة في هذه الصفحة.
اطلب عرض سعر لحل
صف سيناريو النشر وأنواع الموصلات المطلوبة وأعداد الألياف والكميات المستهدفة. كلما كانت مدخلاتك أكثر تحديدًا، تمكن مهندسونا من تأكيد المنتجات المطابقة ومهلة التسليم بشكل أسرع.
