
Simplex Fiber Cable: One Fiber, Counted Properly
Simplex construction is one fiber in one jacket — and half of all ordering mistakes start by forgetting it. Where simplex cords belong, and how to count them.
A simplex fiber cable is a single fiber in a single jacket — one connector at each end, no companion fiber, no zipcord web. Duplex cords exist because most transceivers use two fibers (tx and rx); wherever the link actually uses one fiber, simplex is the correct and cheaper build. The classic ordering error is buying duplex cords and splitting them, leaving loose boots and untidy panels.
Where simplex cords belong
| Application | Why simplex | Nexora cord |
|---|---|---|
| FTTH drops and ONT uplinks | One fiber per subscriber | LC-SC hybrid (simplex) |
| Splitters and WDM ports | Most ports are single-fiber | SC-SC single mode, UPC or APC |
| Monitoring and test leads | One channel per cord | Custom lengths, any polish |
Counting: fibers, not connectors
- Count fibers per link first. A two-fiber transceiver needs two simplex cords or one duplex cord — same fiber count, different construction.
- ST is always simplex. The bayonet connector carries one fiber; a pair of ST cords is what older bays use per link.
- Hybrid ends stay simplex. An LC-to-SC cord is one fiber crossing two connector families — not two fibers.
- Label tx/rx at the panel. With simplex cords, polarity discipline moves from the zipcord to your labeling; mark both ends.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Construction | Single fiber, 2.0/3.0 mm PVC or LSZH jacket |
| Fiber | OS2 G.652D single mode or OM1–OM4 multimode |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical, single mode) |
| Connectors | LC, SC, FC, ST; UPC or APC; hybrid ends available |
| Lengths | 1–20 m standard; custom on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Values marked typical are industry reference figures; the shipped datasheet for each SKU governs.
Buyer FAQ
Can we split a duplex cord into two simplex cords?
It works mechanically but leaves a torn zipcord web and unlabeled fibers. Ordering simplex builds avoids the rework and keeps the panel clean.
Is simplex cable also available as bulk for field termination?
Yes — simplex tight-buffered and distribution constructions exist for indoor runs; field-terminated ends follow the same polish and test discipline as any cord.
How do we order mixed simplex lengths in one shipment?
State length, connector family and polish per SKU line; mixed lines ship together within one lead time. Labels follow the SKU list you provide.
Karar aracı
Simpleks siparişinizi ne belirler?
Yapı kararını seçin — yanıt, bu sayfadaki simpleks kurallarını yeniden ifade eder.
Çözüm fiyat teklifi isteyin
Kurulum senaryonuzu, gerekli konnektör tiplerini, fiber sayılarını ve hedef miktarları tanımlayın. Girdileriniz ne kadar spesifik olursa mühendislerimiz uygun ürünleri ve üretim/teslim süresini o kadar hızlı teyit edebilir.
