LC-LC Single Mode Patch Cable: OS2 Done Right

LC-LC Single Mode Patch Cable: OS2 Done Right

The LC-LC single mode jumper is the default interconnect of modern racks. Yellow jacket, OS2 glass, UPC or APC — and the polarity line most orders miss.

An LC-LC single mode patch cable is the interconnect most racks are built on: OS2 G.652D glass, a yellow jacket, and two LC connectors closing a duplex link. It is also the SKU where ordering detail pays off fastest — polish, polarity and jacket rating decide whether the link comes up on day one or becomes a ticket.

Single mode vs multimode in one table

AttributeOS2 single modeOM3/OM4 multimode
Core / jacket9 µm / yellow50 µm / aqua or violet
ReachKilometers (per transceiver class)100–400 m (per speed)
Typical useUplinks, campus, carrier linksRack-to-rack, in-row
Return lossUPC ≥50 dB / APC ≥60 dB typical≥20–30 dB typical (UPC)
Mixing riskMating SM into MM hardware adds loss — never mix on one linkSame

The polarity line most orders miss

  • State A/B per SKU. A duplex LC single mode cord is built with one crossover or none; the transceiver port expects exactly one per link. Factory labels settle it before the rack.
  • UPC or APC, never both. Blue LC/UPC plugs into blue adapters; green LC/APC into green. One mismatched pair collapses return loss.
  • Length with slack. Measure the route, add service slack, round to a standard length — coiled oversize slack behind a switch is a bend-loss risk.
  • Test data per cord. Acceptance is IL ≤0.3 dB typical (≤0.5 dB max) per cord at 1310/1550 nm; our labels carry the per-cord result.

Key specifications at a glance

ParameterTypical value
FiberOS2 G.652D single mode, 9/125 µm, yellow jacket
Insertion loss≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm)
Return lossUPC ≥50 dB / APC ≥60 dB (typical)
ConnectorsLC/UPC or LC/APC, simplex or duplex
Lengths1–20 m standard; custom on request
MOQ100 pcs per SKU
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Buyer FAQ

Can an LC-LC single mode cord run on a multimode port?

No — single mode glass into multimode hardware adds mismatch loss and can drop the link. Match the cord to the transceiver class.

Do we need APC for ordinary data-center links?

UPC ≥50 dB typical is standard for digital links. APC earns its premium on FTTH, CATV/RF and high-split PON runs.

Why is one end labeled A and the other B?

That is the polarity marking: A meets B across the link, giving the single crossover duplex transceivers expect. Keep labels intact through patching.

Инструмент выбора

Что фиксирует ваш заказ OS2?

Выберите решение по одномодовому режиму — ответ повторяет правила OS2 на этой странице.

Запросить коммерческое предложение на решение

Опишите ваш сценарий развёртывания, требуемые типы коннекторов, количество волокон и целевые объёмы. Чем конкретнее ваши данные, тем быстрее наши инженеры подтвердят подходящие продукты и срок производства.

Запрос по продукции
◆
Запрос по продукции
LC-LC Single Mode Patch Cable: OS2 Done Right (lc-lc-single-mode)