
LC-LC Single Mode Patch Cable: OS2 Done Right
The LC-LC single mode jumper is the default interconnect of modern racks. Yellow jacket, OS2 glass, UPC or APC — and the polarity line most orders miss.
An LC-LC single mode patch cable is the interconnect most racks are built on: OS2 G.652D glass, a yellow jacket, and two LC connectors closing a duplex link. It is also the SKU where ordering detail pays off fastest — polish, polarity and jacket rating decide whether the link comes up on day one or becomes a ticket.
Single mode vs multimode in one table
| Attribute | OS2 single mode | OM3/OM4 multimode |
|---|---|---|
| Core / jacket | 9 µm / yellow | 50 µm / aqua or violet |
| Reach | Kilometers (per transceiver class) | 100–400 m (per speed) |
| Typical use | Uplinks, campus, carrier links | Rack-to-rack, in-row |
| Return loss | UPC ≥50 dB / APC ≥60 dB typical | ≥20–30 dB typical (UPC) |
| Mixing risk | Mating SM into MM hardware adds loss — never mix on one link | Same |
The polarity line most orders miss
- State A/B per SKU. A duplex LC single mode cord is built with one crossover or none; the transceiver port expects exactly one per link. Factory labels settle it before the rack.
- UPC or APC, never both. Blue LC/UPC plugs into blue adapters; green LC/APC into green. One mismatched pair collapses return loss.
- Length with slack. Measure the route, add service slack, round to a standard length — coiled oversize slack behind a switch is a bend-loss risk.
- Test data per cord. Acceptance is IL ≤0.3 dB typical (≤0.5 dB max) per cord at 1310/1550 nm; our labels carry the per-cord result.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Fiber | OS2 G.652D single mode, 9/125 µm, yellow jacket |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical) |
| Connectors | LC/UPC or LC/APC, simplex or duplex |
| Lengths | 1–20 m standard; custom on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Buyer FAQ
Can an LC-LC single mode cord run on a multimode port?
No — single mode glass into multimode hardware adds mismatch loss and can drop the link. Match the cord to the transceiver class.
Do we need APC for ordinary data-center links?
UPC ≥50 dB typical is standard for digital links. APC earns its premium on FTTH, CATV/RF and high-split PON runs.
Why is one end labeled A and the other B?
That is the polarity marking: A meets B across the link, giving the single crossover duplex transceivers expect. Keep labels intact through patching.
Strumento decisionale
Cosa vincola il Suo ordine OS2?
Scegliere la decisione single mode: la risposta ribadisce le regole OS2 presenti in questa pagina.
Richiedi un preventivo per una soluzione
Descrivi il tuo scenario di deployment, i tipi di connettore richiesti, il numero di fibre e le quantità target. Più i tuoi input sono specifici, più rapidamente i nostri ingegneri potranno confermare i prodotti corrispondenti e il lead time.
