LC-LC Single Mode Patch Cable: OS2 Done Right

LC-LC Single Mode Patch Cable: OS2 Done Right

The LC-LC single mode jumper is the default interconnect of modern racks. Yellow jacket, OS2 glass, UPC or APC — and the polarity line most orders miss.

An LC-LC single mode patch cable is the interconnect most racks are built on: OS2 G.652D glass, a yellow jacket, and two LC connectors closing a duplex link. It is also the SKU where ordering detail pays off fastest — polish, polarity and jacket rating decide whether the link comes up on day one or becomes a ticket.

Single mode vs multimode in one table

AttributeOS2 single modeOM3/OM4 multimode
Core / jacket9 µm / yellow50 µm / aqua or violet
ReachKilometers (per transceiver class)100–400 m (per speed)
Typical useUplinks, campus, carrier linksRack-to-rack, in-row
Return lossUPC ≥50 dB / APC ≥60 dB typical≥20–30 dB typical (UPC)
Mixing riskMating SM into MM hardware adds loss — never mix on one linkSame

The polarity line most orders miss

  • State A/B per SKU. A duplex LC single mode cord is built with one crossover or none; the transceiver port expects exactly one per link. Factory labels settle it before the rack.
  • UPC or APC, never both. Blue LC/UPC plugs into blue adapters; green LC/APC into green. One mismatched pair collapses return loss.
  • Length with slack. Measure the route, add service slack, round to a standard length — coiled oversize slack behind a switch is a bend-loss risk.
  • Test data per cord. Acceptance is IL ≤0.3 dB typical (≤0.5 dB max) per cord at 1310/1550 nm; our labels carry the per-cord result.

Key specifications at a glance

ParameterTypical value
FiberOS2 G.652D single mode, 9/125 µm, yellow jacket
Insertion loss≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm)
Return lossUPC ≥50 dB / APC ≥60 dB (typical)
ConnectorsLC/UPC or LC/APC, simplex or duplex
Lengths1–20 m standard; custom on request
MOQ100 pcs per SKU
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Buyer FAQ

Can an LC-LC single mode cord run on a multimode port?

No — single mode glass into multimode hardware adds mismatch loss and can drop the link. Match the cord to the transceiver class.

Do we need APC for ordinary data-center links?

UPC ≥50 dB typical is standard for digital links. APC earns its premium on FTTH, CATV/RF and high-split PON runs.

Why is one end labeled A and the other B?

That is the polarity marking: A meets B across the link, giving the single crossover duplex transceivers expect. Keep labels intact through patching.

Outil d'aide à la décision

Qu’est-ce qui bloque votre commande OS2 ?

Choisissez la décision monomode — la réponse reprend les règles OS2 figurant sur cette page.

Demander un devis de solution

Décrivez votre scénario de déploiement, les types de connecteurs requis, le nombre de fibres et les quantités cibles. Plus vos informations sont précises, plus nos ingénieurs pourront confirmer rapidement les produits correspondants et le délai de livraison.

Demande de renseignements sur le produit
◆
Demande de renseignements sur le produit
LC-LC Single Mode Patch Cable: OS2 Done Right (lc-lc-single-mode)