
LC-LC Single Mode Patch Cable: OS2 Done Right
The LC-LC single mode jumper is the default interconnect of modern racks. Yellow jacket, OS2 glass, UPC or APC — and the polarity line most orders miss.
An LC-LC single mode patch cable is the interconnect most racks are built on: OS2 G.652D glass, a yellow jacket, and two LC connectors closing a duplex link. It is also the SKU where ordering detail pays off fastest — polish, polarity and jacket rating decide whether the link comes up on day one or becomes a ticket.
Single mode vs multimode in one table
| Attribute | OS2 single mode | OM3/OM4 multimode |
|---|---|---|
| Core / jacket | 9 µm / yellow | 50 µm / aqua or violet |
| Reach | Kilometers (per transceiver class) | 100–400 m (per speed) |
| Typical use | Uplinks, campus, carrier links | Rack-to-rack, in-row |
| Return loss | UPC ≥50 dB / APC ≥60 dB typical | ≥20–30 dB typical (UPC) |
| Mixing risk | Mating SM into MM hardware adds loss — never mix on one link | Same |
The polarity line most orders miss
- State A/B per SKU. A duplex LC single mode cord is built with one crossover or none; the transceiver port expects exactly one per link. Factory labels settle it before the rack.
- UPC or APC, never both. Blue LC/UPC plugs into blue adapters; green LC/APC into green. One mismatched pair collapses return loss.
- Length with slack. Measure the route, add service slack, round to a standard length — coiled oversize slack behind a switch is a bend-loss risk.
- Test data per cord. Acceptance is IL ≤0.3 dB typical (≤0.5 dB max) per cord at 1310/1550 nm; our labels carry the per-cord result.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Fiber | OS2 G.652D single mode, 9/125 µm, yellow jacket |
| Insertion loss | ≤0.3 dB typical / ≤0.5 dB max per cord (1310/1550 nm) |
| Return loss | UPC ≥50 dB / APC ≥60 dB (typical) |
| Connectors | LC/UPC or LC/APC, simplex or duplex |
| Lengths | 1–20 m standard; custom on request |
| MOQ | 100 pcs per SKU |
| Lead time | 7–15 working days after deposit |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Buyer FAQ
Can an LC-LC single mode cord run on a multimode port?
No — single mode glass into multimode hardware adds mismatch loss and can drop the link. Match the cord to the transceiver class.
Do we need APC for ordinary data-center links?
UPC ≥50 dB typical is standard for digital links. APC earns its premium on FTTH, CATV/RF and high-split PON runs.
Why is one end labeled A and the other B?
That is the polarity marking: A meets B across the link, giving the single crossover duplex transceivers expect. Keep labels intact through patching.
Entscheidungshilfe
Was bestimmt Ihre OS2-Bestellung?
Treffen Sie die Single-Mode-Entscheidung — die Antwort gibt die OS2-Regeln auf dieser Seite wieder.
Lösungsangebot anfordern
Beschreiben Sie Ihr Einsatzszenario, die benötigten Steckertypen, Faserzahlen und Zielmengen. Je spezifischer Ihre Angaben, desto schneller können unsere Ingenieure die passenden Produkte und die Lieferzeit bestätigen.
