OM3 vs OM4 Premade Trunk Cables for Data Center Cabling

OM3 vs OM4 Premade Trunk Cables for Data Center Cabling

Reach budgets, polarity methods and pre-terminated trunk options for 10G–100G multimode links, with the typical specs to confirm per link before ordering.

Installing a rack row with field-terminated multimode cords costs hours per link; a premade fiber optic cable — a factory-terminated trunk — arrives tested, labeled and ready to pull. For 10G to 100G multimode links the two decisions that shape the order are the fiber class (OM3 or OM4) and the polarity method. This guide gives the reach budget for each class and explains how polarity maps ports before you buy.

Reach budget at a glance

StandardOM3 reachOM4 reach
10GBASE-SR300 m400 m
40GBASE-SR4100 m150 m
100GBASE-SR4100 m150 m

Typical IEEE figures for the common transceiver families; the effective reach of a specific link also depends on total connector loss and patch congestion — confirm per link against the transceiver and datasheet.

Why buyers choose premade trunks

  • Factory-tested links. Each trunk ships with measured insertion and return loss per leg instead of a field termination whose quality depends on the installer's day.
  • Consistent polarity. Method A, B or C is fixed at the factory, so port mapping is predictable across every rack.
  • Faster cutover. Pull, land, test — no fusion splicing or polishing on the floor. Field termination still wins where the route length is unknown until install day.

Polarity in one table

MethodTrunk constructionWhere it is used
Method AStraight-through, key-up/key-down endsPatch panels on both sides
Method BKey-up/key-up (transposed)Direct transceiver-to-transceiver links
Method CPaired flip within the trunkCassettes with pair-level flipping

Decide the method before ordering — it changes how the trunk maps transmit and receive, and mixed methods in one rack are the most common cause of a link that never comes up.

Key specifications at a glance

ParameterTypical value
Fiber classOM3 ≥2,000 MHz·km / OM4 ≥4,700 MHz·km @ 850 nm (typical)
Insertion loss≤0.3 dB typical / ≤0.5 dB max per mated pair
Connector optionsMPO-LC, MPO-SC and LC-LC trunks, 8/12/24-fiber variants
MOQ100 pcs per SKU
Lead time7–15 working days after deposit
Payment30% T/T deposit, balance before shipment
Warranty12 months from shipment date

Buyer FAQ

Is OM4 backward-compatible with OM3 links?

OM4 is a higher-bandwidth fiber, so an OM4 trunk supports every reach an OM3 trunk does at the same transceiver — the reverse is not true. New builds commonly install OM4 so reach headroom exists for future rates.

Which polarity method should we order?

The method follows your panel architecture: Method A for panel-to-panel, Method B for direct transceiver links, Method C for cassette-based zones. Send us the rack diagram and we will map the trunks before quoting.

Can trunks be made to custom lengths?

Yes — custom lengths, fan-out configurations and connector mixes are OEM/ODM options. Provide the route lengths and connector plan with the inquiry.

Инструмент выбора

Какой класс волокна соответствует вашему бюджету линии?

Выберите уровень центра обработки данных, чтобы отобрать подходящий класс патч-кордов.

Запросить коммерческое предложение на решение

Опишите ваш сценарий развёртывания, требуемые типы коннекторов, количество волокон и целевые объёмы. Чем конкретнее ваши данные, тем быстрее наши инженеры подтвердят подходящие продукты и срок производства.

Запрос по продукции
◆
Запрос по продукции
OM3 vs OM4 Premade Trunk Cables for Data Center Cabling (om3-om4-datacenter-cabling)