
Bulk Fiber Optic Cable: Buying on Reels Without Surprise Costs
How to order bulk fiber optic cable on reels: standard drum lengths, cut-length fees, packing weights and the shipping questions to settle before the deposit.
Buying bulk fiber optic cable is a logistics decision as much as a technical one. The glass on a G.652D outdoor cable from two factories may test the same, but the reel it ships on decides whether your crew can pay out the run cleanly or fights a kinked, over-packed drum at the pole. This guide covers the reel-side questions buyers should settle before the deposit: drum lengths, cut lengths, packing weight and freight.
Standard reels vs project cut lengths
| Order form | Best for | Trade-off |
|---|---|---|
| Standard factory reels (commonly 2–4 km per drum for outdoor cables) | Distributors, stock programs, long routes | Best unit price; some offcut waste per route |
| Project cut lengths (e.g. 12 × 500 m) | Campus and FTTH builds with known spans | Less waste on site; per-length handling fee and longer lead time |
| Custom counts on the same construction | Mixed buildings sharing one cable type | One SKU to stock; higher fiber count than any single route needs |
Drum sizes and standard lengths differ per cable construction — confirm the exact figures on the datasheet and quotation for your SKU.
Reel-side details that affect the site
- Drum material and flange. Wooden drums protect outdoor cables in stacked sea freight; check the flange diameter against your reel stand.
- Payout direction. State top-payout or side-payout when the crew's reel stand requires it; reversing a reel on site wastes setup time on every drum.
- End sealing. Every cable end must be capped against water ingress — confirm factory caps on both ends of each drum.
- Sequential meter marks. Print the meter marks so a crew can measure remaining cable on a part-used reel.
Key specifications at a glance
| Parameter | Typical value |
|---|---|
| Fiber type | G.652D single-mode; G.657A2 for tight routes |
| Attenuation @ 1310 / 1550 nm | ≤0.4 / ≤0.3 dB/km (typical; refer to datasheet) |
| Standard reel lengths | Commonly 2–4 km per drum for outdoor constructions |
| Operation temperature | −40 °C to +70 °C (typical) |
| Packing | Wooden drum, end-capped, sea-worthy wrapping |
| Lead time | 7–15 working days after deposit (standard reels) |
| Payment | 30% T/T deposit, balance before shipment |
| Warranty | 12 months from shipment date |
Buyer FAQ
Can we order one cable type in several fiber counts on one order?
Yes — fiber count is a build option on each construction. Send the per-building counts and we quote each SKU separately within one order.
How is bulk cable freight calculated?
Cable reels ship by gross weight and volume. Drum count, drum dimensions and destination port decide the freight figure — request the packing list with the quotation so the landed cost is known before the deposit.
Is there a minimum order for bulk cable?
The minimum order is quoted per cable type and order volume. Send the route lengths and fiber counts with your inquiry and the quotation states the exact MOQ for each SKU.
Ferramenta de decisão
Como será expedido o cabo?
Escolha a sua forma de encomenda — a resposta reitera as regras de bobinas nesta página.
Solicitar uma cotação de solução
Descreva o seu cenário de implementação, os tipos de conector necessários, as contagens de fibra e as quantidades pretendidas. Quanto mais específicos forem os seus dados, mais rapidamente os nossos engenheiros poderão confirmar os produtos correspondentes e o prazo de entrega.
